JAI’s Drive5 is a high performance camera system designed for a wide range of ANPR-based applications, such as open road tolling (ORT), toll booth and bridge tolling, border and access control, section speed control, weigh-in-motion, and more. It has many of the same features as VISCAM 1000, but is designed for projects with simpler networking and integration requirements.
Drive 5 features a high-speed, 5-megapixel CMOS camera and intelligent triggering modes to ensure that each vehicle is captured in the best location within the frame for ANPR readability. This includes high-speed traffic, lane changes, and closely-spaced vehicles.
Advanced algorithms constantly check image saturation levels, sun position, and other factors to ensure the best possible exposure under the most demanding situations including high contrast from bright sunlight and shadows; glare and bright spots; headlights and nighttime conditions; different plate colors and styles; and much more.
With its compact and rugged design, the Drive5 is an excellent choice for projects without large existing gantry structures and where integration to standard lane controllers is not required.
5-megapixel CMOS camera with high sensitivity and choice of fixed focal or zoom lens.
Monochrome or color images.
Single- or dual-lane coverage.
High internal frame rate (72 Hz).
Trigger-based operation for precise vehicle positioning without wasted frames.
Real-time light sensing and exposure adjustment.
H.264 video streaming capability.
Basic digital signing and encryption.
Easy integration with back office systems, and third-party software for plate reading or visual matching.
Compact weatherproof enclosure.
Monochrome or color 5 MP, 2560 x2048 CMOS global shutter 72 fps internal frame rate
JPEG
Continuous H.264 video stream
Fixed focal or zoom lens for single or multiple lane coverage
Smart video self-triggering or external triggering via TTL or Ethernet
Auto exposure via real-time adaptive light sensing
10/100/1000 Base T Ethernet interface Image transfer over FTP (with backup site)
On-board Linux processor
Digital signing and encryption
LED ring lighting with white, NIR, or blue LEDs (up to 30 meters)
446 mm x 214 mm x 133 mm with IP66 and IK07 protection ratings
24V DC +/- 10%, 48W max. (with heater on)
-30°C to +55°C
5 kg maximum
Drive 5 is an excellent choice for projects without large existing gantry structures and where integration to standard lane controllers is not required.
Drive 5 can be used on toll roads or toll bridges to provide high quality images for ANPR software and enforcement packages.
For smaller ORT projects, Drive 5 can be installed in systems that collect road tolls cost-effectively without the need for toll booth installations and radio frequency transponders.
Unlike simple “speed traps”, average speed enforcement systems track vehicles over longer distances by matching plate numbers or vehicle images to determine if enforcement action is required.
Drive 5 systems provide a full range of features for 24/7 monitoring of border crossings or vehicle access to restricted facilities.
Drive 5 systems offer the complete set of imaging capabilities needed by integrators implementing weigh-in-motion systems. Reliable plate images can be captured at normal traffic speeds to maximize the efficiency of transport.
Get advice from our traffic imaging experts.
Update your browser to display this website correctly. Update my browser now
×