This product is in the process of being discontinued and is not recommended for new projects. Last orders must be placed by 30 September 2019. Click the “Contact a JAI engineer” button below to discuss your requirements and explore alternative product options. The CV-A1 is a monochrome area scan camera providing 1.4-megapixel resolution (1380 x 1035), but over a unique analog progressive scan interface (non-interlaced). It features the Sony ICX205 CCD for excellent image quality at a frame rate of 16 fps.
The CV-A1 provides output over a traditional analog coaxial connector but with a full progressive scan readout that supports higher resolution than standard interlaced output and avoids “comb effect” interlaced artifacts.
The CV-A1 features the Sony ICX205AL CCD with 4.65-micron square pixels and a smearless readout mode for low noise images with excellent contrast and dynamic range.
The CV-A1 includes three partial scanning settings that can increase frame rates up to 75 fps. Also included is support for 1x2, 2x1, and 2x2 binning for up to 4X normal sensitivity.
Analog progressive scan camera with monochrome CCD and 1/2” optical format.
1380 x 1035 resolution at 16 fps.
4.65 x 4.65-micron pixel size.
Supports 1x2, 2x1, and 2x2 binning options for up to 4 times normal sensitivity.
Partial scanning modes can increase frame rate up to 75 fps for 1/6 resolution.
5 µs minimum exposure time.
RS232C control of all camera settings.
CV-A1
Area Scan
Mono
Visible
1.4 MP
1380 x 1035 px
16 fps
No
Analog
1xCCD
ICX205AL
1/2 inch
4.65 x 4.65 µm
Global shutter
8.1 mm
6.4 x 4.8 mm
29 x 44 x 66 mm
150 g
C-mount
1.8 Watt
-5°C to +45°C
Tripod adapter for all JAI industrial M- and A-series cameras (except CV-M53x and CV-M436)
Only use the supplied M3 screws for mounting to camera body. Using longer screws can damage internal circuit boards. NOTE: For CV-A10GE and CV-M70GE use the MP-41 adapter plate.
A universal IR-cut filter for JAI monochrome cameras. Fits into the C-mount thread of most cameras to help enhance MTF and contrast.
NOTE: When using this filter. please observe the protrusion of the exit pupil lens. Lenses with long exit pupil protrusion, typically wide angle lenses, can damage the IR-cut filter.
The HR10A-7P-6S is a universal connector used for power and control signals for most JAI Go Series and Go-X Series cameras and can also be used with serial communication (RS-232C) connectors on some CV Series models. The connector is a female plug, with sockets, that mates to the connector on the back of the camera. It has soldering cups for easy assembly of custom cables.
The HR10A-10P-12S is a universal connector used for power and control signals for many JAI cameras. The connector is a female plug, with sockets, that mates to the connector on the back of the camera. It has soldering cups for easy assembly of custom cables.
CV-A1 analog progressive scan cameras can be used in a variety of machine vision applications.
Traditional coaxial cabling can cover large distances with good noise immunity to surrounding machinery.
Inspecting seals, tubing, syringes, and many other medical items can utilize the many features of the CV-A1.
CV-A1 cameras offer better resolution than traditional analog interlaced cameras for finer precision in metrology systems.
CV-A1 cameras are adaptable to many types of inspection systems for sorting components, checking bare boards, and analyzing component placement.
Get advice from our product engineers.
Update your browser to display this website correctly. Update my browser now
×