Spark Series
SP-45001M-CXP4
45-megapixel area scan camera

The SP-45001M-CXP4 provides the same 44.7-megapixel monochrome resolution as the SP-45000M-CXP4 but uses a reduced-speed version of the OnSemi XGS 45000 CMOS imager. This results in a list price that is more than 20 percent lower for customers not needing the ultra high performance of the full speed models. It offers the same high image quality and special functions of the higher-speed models, making it well suited to a wide range of high resolution applications.

Product Image SP 45000 CXP4 Front View 45 degree 410x370px

Product Image SP 45000 CXP4 Rear View 45 degree 410x370px

Product Image SP 45000 CXP4 Direct Side View 410x370px

Product Image SP 45000 CXP4 Direct Rear View 410x370px

Product Image SP 45000 CXP4 Direct Front View 410x370px

Significant cost savings for moderate speed applications

With a maximum full resolution frame rate of 38 fps for 8-bit images and 32 fps for 10-bit or 12-bit images, the SP-45001M-CXP4 provides ample speed to support a wide range of high-resolution applications where ultra-high performance is not required. The lower price point enables vision system designers to maximize the cost competitiveness of their systems, especially for applications where multiple high-resolution cameras are utilized.

Built-in functions for HDR imaging

With an exceptionally low dark noise rating (<5e-), the SP-45001M-CXP4 boasts 67 dB of standard dynamic range, extendable to 73 dB by built-in linear or knee-point HDR functions for both monochrome and color models.

Frame averaging for reduced shot noise

For applications that demand the highest possible image quality, the SP-45001M-CXP4 features a Frame Integration mode that can average the exposures of up to 8 sequential frames to dramatically reduce the amount of shot noise in the image.

Features
Specifications
Downloads
Accessories

Features

44.7-megapixel resolution at 51 fps.
44.7-megapixel resolution at 38 fps (8-bit) and 32 fps (10-bit or 12-bit).
Compact 31.5 mm sensor diagonal with 3.2-micron square pixels.
Global shutter CMOS imager for no motion-related distortion.
Monochrome output with 67 dB of standard dynamic range.
Built-in HDR functions provide up to 73 dB of HDR as 14-bit linear output or 8/10/12-bit knee-point compressed images.
Single ROI and multi-ROI modes with up to 64 defined regions.
Lens control function for utilizing Birger Mount via RS-232C lens control commands.
Edge enhancer function, plus vertical and horizontal image flipping.
Image sequencer plus frame integration modes for noise reduction or HDR.
Automatic Level Control (ALC) for dynamic lighting conditions.
Four-channel CoaXPress v2.0 interface supporting up to 6.25 Gbps per lane.
Can share processing across multiple PCs via the CoaXPress link sharing function.
Industrial grade performance with 80G shock and 10G vibration rating.

Specifications

Product Line

Spark Series

Model

SP-45001M-CXP4

Type

Area Scan

Color / Mono

Mono

Light Spectrum

Visible

Resolution

45 MP

Resolution WxH

8192 x 5460 px

Frame rate / Line rate

38 fps

ROI

Yes

Interface

CoaXPress-4-Lanes

Sensors

1xCMOS

Sensor Name

XGS 45000

Optical Format

Super 35 mm

Cell Size WxH

3.2 x 3.2 µm

Shutter type

Global shutter

Sensor Diagonal

31.5 mm

Active Sensor Dimensions WxH

26.2 x 17.4 mm

Camera Dimensions HxWxL

62 x 62 x 84 mm

Weight

330 g

Video Output

8/10/12-bit *

Lens Mount

F-mount or M-42A mount

Power Consumption

12.5 Watt

Operating Temperature (ambient)

-5°C to +45°C

Dimension Image SP 45000/1 CXP2/4/A Side

* Some video processing functions not available with 12-bit output

Downloads

Manual & datasheet

Compliance documents

PD-12 Power Supply

A universal power supply that works with all JAI cameras equipped with a 12-pin Hirose power connector. Four versions are available:

PD-12UUP U.S. plug with 12-pin Hirose connector to camera

PD-12UEP European plug with 12-pin Hirose connector to camera

PD-12UU U.S. plug, flying leads (no 12-pin connector)

PD-12UE European plug, flying leads (no 12-pin connector)

Download Datasheet

MP-42 Tripod Mounting Plate

Tripod adapter features mounting holes to fit spacing on Spark Series and (discontinued) Elite Series housings. Standard 1/4-20 attachment to tripods. Includes M3 screws (Depth 5). Only use the supplied screws or other screws having the proper length. Using longer screws can damage internal circuit boards.

Download 2D CAD drawing

PC-12P Hirose 12-pin Connector

The HR10A-10P-12S is a universal connector used for power and control signals for many JAI cameras. The connector is a female plug, with sockets, that mates to the connector on the back of the camera. It has soldering cups for easy assembly of custom cables.

12P-02S Power Cable

This cable features flying leads on one end and a Hirose 12-pin connector on the other wired to match the pinout of JAI cameras with 12-pin connectors. The flying leads enable power to be supplied via two of the Hirose pins, while the remaining wires/pins can be utilized to access various I/O functions of JAI cameras (see individual camera datasheets/manuals for functions accessible through the Hirose connectors).

The cables can be used with JAI’s own “flying leads” power supplies, or with third-party or custom power supply systems.

Download Datasheet

10P-10M-AUX Auxiliary TTL cable

The 10P-10M-AUX is 10-meter cable for JAI cameras equipped with a 10-pin Hirose “auxiliary” connector. The plug at one end of the cable connects to the 10-pin connector on the back of the JAI camera. Flying leads at the other end of the cable can be used to send/receive TTL signals to/from specific pins on the auxiliary connector. Not all I/O functions may be supported depending on the pinout of each camera model. Check the pinout carefully or consult with JAI before purchasing.

Download a datasheet

Here are a few applications where Spark Series cameras are especially suitable

Spark Series cameras are the perfect starting point for a wide range of machine vision, entertainment, and mapping applications.

Electronics inspection

Verification of circuit layouts and coatings, ball grid array inspection, component positioning, solder paste quality, dimensional accuracy, pick & place applications, and more.

Sports and Entertainment

Spark Series cameras capture high resolution images to track player movement, create virtual environments, generate broadcast replays, and other tasks.

Mapping and aerial imaging

Cameras mounted on aircraft, satellites, or ground vehicles capture images to help create maps, analyze terrain, or build street views.

Metrology

Many types of industrial parts must be carefully measured to ensure conformance to system requirements. High resolution images enable higher precision on critical measurements.

Flat panel display inspection

High resolution, high speed, and high image quality enable large display panels to be inspected quickly and thoroughly.

High-end surveillance and facial recognition

High resolution Spark Series cameras support the development of new systems to ensure the safety of public venues, transportation hubs, borders, and elsewhere.

Find the perfect machine vision camera to meet your application requirements

Get advice from our camera experts.