The LT-200CL is a high performance prism-based industrial RGB color line scan camera capturing simultaneous separate images of red, green and blue light. Through advanced prism technology it provides the best possible performance and precision for web-based or continuous imaging applications.
The high performance CMOS camera can output 3 x 2048 pixel resolution at 30,383 lines per second, while maintaining image quality at a signal-to-noise ratio of 57 dB or higher.
In JAI’s multi-sensor color line scan cameras, the coatings on the prism efficiently filter the RGB light spectrum to each individual sensor, providing steep spectral curves that minimize color “crosstalk” for supreme color precision.
Prism technolgy makes it possible to view the red, green and blue channels through a single optical plane. This method eliminates off-angle viewing problems, spatial compensation, and other issues that can be associated with tri-linear camera technology.
3-CMOS prism-based camera.
Simultaneous imaging of R/G/B.
One optical path.
3 lines x 2048 pixels.
14 μm square pixels.
Up to 30,383 lines/s.
3 x 8-bits or 3 x 10-bits output.
One-push automatic white balancing.
Flat-field correction.
Color shading compensation.
Pixel binning.
Windowing & sub-sampling modes.
M52 mount (Standard).
Optional Nikon F-mount.
Sweep+ Series
LT-200-CL
Line Scan
Color
Visible
N/A
2048 x 1
30 kHz
Camera Link
3xCMOS RGB
28.67 mm
14.0 x 14.0 µm
Global shutter
28.7 mm
90 x 90 x 90 mm
830 g
8/10-bit
F-mount or M52-mount
5.4 Watt
-5°C to +45°C
A universal power supply that works with all JAI cameras equipped with a 12-pin Hirose power connector. Four versions are available:
PD-12UUP U.S. plug with 12-pin Hirose connector to camera
PD-12UEP European plug with 12-pin Hirose connector to camera
PD-12UU U.S. plug, flying leads (no 12-pin connector)
PD-12UE European plug, flying leads (no 12-pin connector)
Download Datasheet
The HR10A-10P-12S is a universal connector used for power and control signals for many JAI cameras. The connector is a female plug, with sockets, that mates to the connector on the back of the camera. It has soldering cups for easy assembly of custom cables.
The 26CL-02-26 Camera Link cable is a standard interface cable with full-size 26-pin Camera Link male connectors on each end. It is designed to work with any JAI camera with a model number ending in "CL". It does not fit the smaller "Mini Camera Link" connectors found on models with "MCL" or "PMCL" suffixes. Length is 2 meters.
This cable features flying leads on one end and a Hirose 12-pin connector on the other wired to match the pinout of JAI cameras with 12-pin connectors. The flying leads enable power to be supplied via two of the Hirose pins, while the remaining wires/pins can be utilized to access various I/O functions of JAI cameras (see individual camera datasheets/manuals for functions accessible through the Hirose connectors).
The cables can be used with JAI’s own “flying leads” power supplies, or with third-party or custom power supply systems.
The Sweep+ Series line scan cameras are the ideal choice if you have imaging applications where you need very accurate color imaging via separate R-G-B color channels.
Bulk inspection of fruit and vegetables looking at size, colors, ripeness and damage for precise sorting and grading.
Color and quality inspection of frozen food, rice grains, coffee beans, peas, cereals, tea and tobacco.
Wafer geometry and surface inspection for early defect detection. Also surface inspection of flat panels/displays looking for scratches and defective screen pixels.
Inspection of stuffed PCB boards including traces, solder, component placement/alignment, shorting, and other items where color inspection is important.
Color inspection of magazines and pharmaceutical packaging as well as currency inspection looking at color correctness.
“Unwrapping” of cylindrical items such as cans, bottles, pens etc. for 360-degree label inspection.
Web inspection of roll-based products including paper, plastic, textiles. Also inspection of wood, tile glaze and glass inspection.
Finish line cameras used in horse racing, speed boats, track events, and other high precision photo-finish applications.
Get advice from our product engineers.
Update your browser to display this website correctly. Update my browser now
×