Request a quote

Go-X Series
Compact 6.3 MP area scan camera with rolling shutter

The GOX-6409M-PGE is a compact, attractively-priced industrial area scan camera with rolling shutter. It offers excellent sensitivity with a blend of features and industrial grade reliability ideal for the next generation of cost-efficient vision systems. It delivers 6.3-megapixel monochrome output at up to 18 fps over a GigE Vision interface.

Contact a JAI engineer
Product Image GOX 6409 PGE Go X Series 45 degree Front View 410x370px
Product Image GOX 6409 PGE Go X Series Front View 410x370px
Product Image Go X Series 45 degree Rear Gig E Vision 410x370px
Product Image Go X Series Rear Gig E Vision 410x370px

Excellent sensitivity and cost-efficiency

This Go-X camera features the Sony IMX178 STARVIS sensor. Its back-side illuminated design offers excellent light sensitivity with high quantum efficiency. With its rolling shutter technology and attractive price, this camera is ideal in vision systems looking at non-moving objects and where cost-efficiency is a key system design parameter.

Built for non-stop operation

Go-X Series cameras are built using JAI's proven manufacturing process that has delivered field failure rates of less than two cameras per thousand over the last five years. They're designed to withstand the shock, vibration, and thermal demands of typical industrial environments so they can keep critical inspection systems running 24/7/365.

Pre-screened for dust and other particles

Special dust prevention measures include cleanroom assembly, internal seals around the sensor compartment, and a pre-screening process to ensure every camera shipped delivers the best possible image quality via a clean, dust-free optical path.


  • 6.3-megapixel area scan camera with 2.4 x 2.4-micron pixels and 1/1.8” optical format.

  • Sony STARVIS IMX178 CMOS image sensor with rolling shutter and back-side illumination technology for enhanced sensitivity.

  • GigE Vision interface supporting long cable lengths and network configurations.

  • Automatic Level Control (ALC) to maintain exposure in dynamic lighting conditions.

  • Small and lightweight to mount easily on robotic arms, UAVs, and any other machine vision systems where motion or portability are vital.

  • Can be powered over the interface (PoE) or from an external power supply via 6-pin Hirose connector.

  • Three sets of mounting holes with 20 mm, 21 mm, and 12 mm spacing to fit most existing installations with no re-tooling required.

  • Industrial grade performance with ratings of 80G shock, 10G vibration, plus excellent thermal dissipation.

  • Full six-year warranty.

  • Free SDK supporting Windows, Linux, and Linux for ARM embedded system development.


Product Line

Go-X Series




Area Scan

Color / Mono


Light Spectrum

Visible + NIR


6.3 MP

Resolution WxH

3088 x 2064 px

Frame rate / Line rate

18 fps




GigE Vision 1-Cable (PoE)



Sensor Name

IMX178 (Rolling)

Optical Format

1/1.8 inch

Cell Size WxH

2.4 x 2.4 µm

Shutter type

Rolling shutter

Sensor Diagonal

8.8 mm

Active Sensor Dimensions WxH

7.4 x 4.9 mm

Camera Dimensions HxWxL

29 x 29 x 51.5 mm


65 g

Video Output


Lens Mount


Power Consumption

3.7 Watt

Operating Temperature (ambient)

-5°C to +45°C

Dimension Image GOX PGE side

Here are a few applications where Go-X Series industrial cameras are especially suitable

The Go-X Series cameras with rolling shutter are the perfect starting point for a wide range of machine vision applications.


From vision-guided robot arms to autonomous vehicles, Go-X Series cameras provide high quality images in a compact yet industrial-grade form factor.

Electronics inspection

Go-X Series cameras fit nicely into systems for inspecting printed circuit boards, sorting small parts, and other electronics-related applications.


The Go-X cameras (with rolling shutter technology) can be used for stop-and-go inspection of multiple series numbers, and bar codes for documentation and traceability purposes as well as quality inspection of labels.

Metrology / gauging

Measurement of geometrical dimensions like distance, radius, diameter, etc. in various industrial manufacturing processes across industry sectors.

Semiconductor inspection

Defect inspection, dimensional measurements etc. in various states of production process to ensure that defects are eliminated as early as possible.

Life sciences and microscopy

Imaging of human tissue slices in whole field pathology scanners as well as cell classification and counting. Other applications include ophthalmology and bright-field microscopy.

Find the perfect machine vision camera to meet your application requirements

Get advice from our camera experts

Contact a JAI engineer
Jai Engineer English 390Px
You are using an outdated browser!

Update your browser to display this website correctly. Update my browser now