Home
FSFE-3200T-10GE

Fusion Series: Flex-Eye base model
FSFE-3200T-10GE

JAI's FSFE-3200T-10GE model is a 3-CMOS multispectral prism camera design that you can customize to meet the needs of your application. It features three, prism-mounted 3.2-megapixel CMOS imagers that are aligned to a common optical path for perfect image registration regardless of motion or viewing angle.

The Flex-Eye concept lets you create your own custom version of this camera. You define the width and location for each of the camera's three wavebands, placing them all in the visible spectrum or in a combination of visible and NIR locations required to maximize the effectiveness of your vision system for multispectral inspection or analysis.

Product Image FS 3200 D T 10 GE front 45 degree 410x370px

Product Image FS 3200 D T 10 GE Rear 45 degree 410x370px

Product Image FS 3200 D T 10 GE front view 410x370px

Product Image FS 3200 D T 10 GE Direct rear view 410x370px

Multispectral imaging YOUR WAY!

With Flex-Eye you can custom design your own multispectral camera, getting simultaneous imaging of visible or visible plus near infrared wavebands fine-tuned to your specific application. For each of the 3-CMOS sensors you can define the spectral location and width of the waveband within the spectral range of 405 nm to 1000 nm. Learn more about Flex-Eye multispectral customization options and explore the waveband configurator.

Higher resolution and higher efficiency

The new generation of JAI’s multispectral Fusion cameras provides four times higher resolution than previous models and sets a new standard for frame rates (107 frames/s in full resolution) thanks to the use of a fast “Pregius" sensor (IMX252), as well as the use of a high-speed 10 GigE interface.

Replaces multiple inspection stations with a single camera setup

JAI’s multispectral prism technology ensures perfect three-channel alignment, allowing users to replace multiple inspection stations with a single setup, providing both ease of use and lower equipment and maintenance costs. All designed to lead to better efficiency, productivity, and quality of your vision system.

Features
Specifications
Downloads
Accessories

Features

Multispectral prism-based 3-CMOS area scan camera for simultaneous imaging of 3 wavebands in the visible or visible plus NIR spectral range.
Customize each waveband for a precise match to your inspection or imaging application.
Define 3 custom wavebands anywhere between 405-1000 nanometers (nm). Bayer sensor options for waveband located in visible region.
Set wavebands as narrow as 25 nm at 5 nm increments.
Easy to use on-line configurator for smooth project start-up.
3 x 3.2-megapixel resolution at up to 107 frames/s.
Backwards-compatible 10GBASE-T (10 GigE) interface auto-negotiates to match the speed of connected equipment including NBASE-T (5 GigE and 2.5 GigE) and standard 1 Gbps 1000BASE-T GigE Vision.
Separate exposure control for each channel allows the channels to be adjusted to one another without changes in the gain – maintaining a consistent signal-to-noise ratio at all times.
Sequencer function for on-the–fly change of gain, exposure, and ROI settings.
Supports IEEE 1588 Precision Time Protocol for synchronization in multi-camera applications.
Triple-stream output enables all 3 wavebands to be simultaneously output over a single cable.
Supports separate or unified control of key camera parameters for each channel.
Single- and multi-ROI modes provide higher speeds with lower processing loads.
Excellent shock and vibration resistance with high MTBF for supreme reliability and durability giving low-cost of ownership.

Specifications

Product Line

Fusion Series

Model

FSFE-3200T-10GE

Type

Area Scan

Color / Mono

Multispectral

Light Spectrum

3-Bands Visible + NIR (Prism)

Resolution

3.2 MP

Resolution WxH

2048 x 1536 px

Frame rate / Line rate

107 fps

ROI

N/A

Interface

10 Gbps GigE Vision

Sensors

3xCMOS (Vis/NIR)

Sensor Name

IMX252

Optical Format

1/1.8 inch

Cell Size WxH

3.45 x 3.45 µm

Shutter type

Global shutter

Sensor Diagonal

8.8 mm

Active Sensor Dimensions WxH

7.1 x 5.3 mm

Camera Dimensions HxWxL

62 x 62 x 86.5 mm

Weight

270 g

Video Output

8/10/12-bit

Lens Mount

C-mount

Power Consumption

10.4 Watt

Operating Temperature (ambient)

-5°C to +45°C

Downloads

Manual & datasheet

Software

GPIO 12-pin Input/Output connector

GPIO & Power 12-pin Input/Output female connector and cord with flying leads. (LKK-IO-12PF-DM)

Connector type end A: 12-pin female Straight (Hirose equivalent).
Connector type end B: Flying leads.

Item number:

31017462: GPIO12p FemFlyingLeads 0.5m LKK-IO-12PF-0.5 (0.5 meter cable)

31017440: GPIO12p FemFlyingLeads 2m, LKK-IO-12PF-02 (2 meter cable).

31017441: GPIO12p FemFlyingLeads 5m, LKK-IO-12PF-05 (5 meter cable).

31017442: GPIO12p FemFlyingLeads 10m, LKK-IO-12PF-10 (10 meter cable).

Note: This item can ONLY be ordered in connection with the camera.(Not available for stand alone orders)

Download datasheet

Power supply unit with 12-pin connector cable

Power supply unit with 12-pin female connector cable - without power cord.
(LKK-PSU-12PF-1.25)

Hirose equivalent connector with cable length of 1.25 meters.

Item number - Power Supply:

31017431: PSU 12-pin 1.25m LKK-PSU-12PF-1.25 (1.25 meter cable length)

Download datasheet

If you plan to include a power supply when ordering our cameras, please remember to also order the appropriate power cord for the power supply.
(Power cords are sold separately from the power supply).

Item numbers - Power Cords:

31017432 (US/Japan): CordPSUTypeA(USJP)1.2m LKK-PSU-PWR-A-1.2 (1.2 meter cable lenght).

31017433 (China): CordPSUTypeI(CN) 1.2m LKK-PSU-PWR-I-1.2 (1.2 meter cable lenght).

31017434 (Europe/Korea): CordPSUTypeC(Euro) 1.5m LKK-PSU-PWR-C-1.5 (1.5 meter cable lenght).

Note: Power supply item and power cords item can ONLY be order in connection with the camera (Not available for stand alone orders).

MP-41 Tripod Mounting Plate

Tripod adapter for Fusion Series cameras and some discontinued models with 40 mm spacing between mounting holes.

Only use the supplied M3 screws having the proper length. Using longer screws can damage internal circuit boards.

Prism-optimized lens series

JAI's prism-optimized lenses feature special designs to fit with multi-waveband cameras so that you can reap the full benefits of the prism technology. JAI's prism-optimized lenses deliver the sharp, high quality images you rely on from your prism-based camera.

For more information on lenses available for the specific camera model, please download our Lens Brochure.

Accessory Prism Optimized Lenses 370x285px

Here are a few applications where Fusion FlexEye industrial cameras are especially suitable.

Fusion Series Flex-Eye area scan cameras are the ideal choice if you have multispectral imaging applications needing customized visible or visible plus NIR wavebands to optimize their effectiveness.

Inspection of nuts, almonds, and olives

The color, size, shape and damage nuts and almonds can be inspected using the RGB channel, while foreign objects (including olive pits) are more clearly seen with the NIR channel.

Life sciences/digital pathology

Multispectral analysis helps identify specific types of cells, viruses, or other entities that may be difficult to classify in a single spectral band.

Fluorescence-guided surgery

Many surgical systems are utilizing fluorescence compounds injected into blood vessels or surrounding tissues and excited by a laser to highlight areas that can be overlaid on the surgeon’s visible color image to guide the operation.

Vegetation analysis and weed removal systems

Precision agriculture or intelligent farming has seen an exponential growth in the recent years. Removal of weeds or wild plants is of growing importance in intelligent farming and multi-spectral cameras are playing a vital role.

2D print inspection

Color inspection of magazines and pharmaceutical packaging as well as currency inspection looking at color correctness, water marks and security features woven into bank notes.

Multi-layer electronics circuit board inspection

Inspection of stuffed PCB boards including traces, solder, component placement/alignment, shorting, and other items where color and NIR inspection is important.

Fruit and vegetable inspection

Fruit and vegetable inspection that simultaneously look at colors, ripeness, damages, signs of rot under skin, as well as detecting foreign objects (e.g. stones, metal pieces etc.).

LCD display inspection

Surface inspection of flat panels/displays looking for scratches and defective screen pixels.

Find the perfect machine vision camera to meet your application requirements.

Get advice from our camera experts