The SW-4000TL-10GE is a high speed trilinear line scan camera that delivers outstanding color line scan performance for applications that don't require the ultimate precision provided by the prism technology in JAI's Sweep+ Series. Featuring a maximum line rate of 66 kHz for 8-bit output, it is one of the fastest 3 x 4096 color line scan cameras on the market.
The SW-4000TL-10GE is the only high-speed trilinear camera to offer support for both vertical and horizontal binning, as well as built-in color space conversions to HIS and CIEXYZ color gamuts.
The SW-4000TL-10GE can be directly connected to rotary encoders, which simplifies setup and enables automatic detection of scan direction for use with reciprocating slide tables. Encoder signals can be daisy-chained from one camera to the next in multi-camera setups.
The SW-4000TL-10GE trilinear line scan camera is equipped with a super-fast 10 GigE interface with backwards compatibility to lower speed Ethernet standards. Intelligent auto-negotiation adjusts to support NBASE-T speeds (5 GigE and 2.5 GigE output), as well as the traditional 1000BASE-T speed (1 Gbps GigE Vision output).
4K line scan resolution (4096 pixels per line).
One of the fastest 4K trilinear line scan cameras - up to 66 kHz maximum line rate.
Supports vertical dual-line binning, 2x horizontal binning, or both.
Advanced 10 GBASE-T (10 Gbps) interface with backwards compatibility to NBASE-T and 1000BASE-T data rates.
Built-in color space conversion from RGB to HSI, CIE XYZ, sRGB, Adobe RGB, and custom RGB formats.
Direct connection to rotary encoders including automatic scan direction detection.
Flat-field, color shading, and chromatic aberration correction and-push automatic white balancing.
Sub-pixel spatial compensation and tilted view correction (keystone), to ensure high image fidelity.
Nikon F-mount or M42 mount (with 16 mm flange back distance).
Sweep Series
SW-4000TL-10GE
Line Scan
Color
Visible
N/A
4096 x 3
66 kHz
Yes
10 Gbps GigE Vision
1xCMOS - Trilinear
Custom
30.72 mm
7.5 x 7.5 µm
Global shutter
30.7 mm
62 x 62 x 106 mm
340 g
8/10/-bit
F-mount or M-42A mount
9.3 Watt
-5°C to +45°C
A universal power supply that works with all JAI cameras equipped with a 12-pin Hirose power connector. Four versions are available:
PD-12UUP U.S. plug with 12-pin Hirose connector to camera
PD-12UEP European plug with 12-pin Hirose connector to camera
PD-12UU U.S. plug, flying leads (no 12-pin connector)
PD-12UE European plug, flying leads (no 12-pin connector)
Download Datasheet
This cable features flying leads on one end and a Hirose 12-pin connector on the other wired to match the pinout of JAI cameras with 12-pin connectors. The flying leads enable power to be supplied via two of the Hirose pins, while the remaining wires/pins can be utilized to access various I/O functions of JAI cameras (see individual camera datasheets/manuals for functions accessible through the Hirose connectors).
The cables can be used with JAI’s own “flying leads” power supplies, or with third-party or custom power supply systems.
The HR10A-10P-12S is a universal connector used for power and control signals for many JAI cameras. The connector is a female plug, with sockets, that mates to the connector on the back of the camera. It has soldering cups for easy assembly of custom cables.
The 10P-10M-AUX is 10-meter cable for JAI cameras equipped with a 10-pin Hirose “auxiliary” connector. The plug at one end of the cable connects to the 10-pin connector on the back of the JAI camera. Flying leads at the other end of the cable can be used to send/receive TTL signals to/from specific pins on the auxiliary connector. Not all I/O functions may be supported depending on the pinout of each camera model. Check the pinout carefully or consult with JAI before purchasing.
Download a datasheet
The Sweep Series trilinear line scan cameras are the perfect starting point for a wide range of color inspection applications.
Inspection of color print materials on web presses including magazines, brochures, flyers, packaging, etc.
High-speed inspection of roll-based products including colored films, plastics, textiles, roofing materials, and more.
Color uniformity on wafer surfaces, patterned wafer inspection, and other wafer/IC defect inspections.
Inspection of glazed ceramic tiles
Sorting of lumber by color and grain pattern, color matching on laminates and other flooring products.
Sorting of small parts by color, checking of resistor values, inspection of wiring and component placement on printed circuit boards.
Sorting of scrap materials, glass, plastics, and other items with various colors and shapes.
Food sorting of fruits, produce, and other fresh foods based on color, size, and other parameters.
Get advice from our product engineers
Update your browser to display this website correctly. Update my browser now
×