The SP-45001C-CXP4 provides the same 44.7-megapixel color resolution as the SP-45000M-CXP4 but uses a reduced-speed version of the OnSemi XGS 45000 CMOS imager. This results in a list price that is more than 20 percent lower for customers not needing the ultra high performance of the full speed models. It offers the same high image quality and special functions of the higher-speed models, making it well suited to a wide range of high resolution applications.
With a maximum full resolution frame rate of 38 fps for 8-bit images and 32 fps for 10-bit or 12-bit images, the SP-45001C-CXP4 provides ample speed to support a wide range of high-resolution applications where ultra-high performance is not required. The lower price point enables vision system designers to maximize the cost competitiveness of their systems, especially for applications where multiple high-resolution cameras are utilized.
With an exceptionally low dark noise rating (<5e-), the SP-45001C-CXP4 boasts 67 dB of standard dynamic range, extendable to 73 dB by built-in linear or knee-point HDR functions for both monochrome and color models.
For applications that demand the highest possible image quality, the SP-45001C-CXP4 features a Frame Integration mode that can average the exposures of up to 8 sequential frames to dramatically reduce the amount of shot noise in the image.
44.7-megapixel resolution at 38 fps (8-bit) and 32 fps (10-bit or 12-bit).
8K resolution (7680 x 4320) at 48 fps
Compact 31.5 mm sensor diagonal with 3.2-micron square pixels.
Global shutter CMOS imager for no motion-related distortion.
Raw Bayer color output with 67 dB of standard dynamic range.
Built-in HDR functions provide up to 73 dB of HDR as 14-bit linear output or 8/10/12-bit knee-point compressed images.
Single ROI and multi-ROI modes with up to 64 defined regions.
Lens control function for utilizing Birger Mount via RS-232C lens control commands.
Edge enhancer function, plus vertical and horizontal image flipping.
Image sequencer plus frame integration modes for noise reduction or HDR.
Automatic Level Control (ALC) for dynamic lighting conditions.
Four-channel CoaXPress v2.0 interface supporting up to 6.25 Gbps per lane.
Can share processing across multiple PCs via the CoaXPress link sharing function.
Industrial grade performance with 80G shock and 10G vibration rating.
Spark Series
SP-45001C-CXP4
Area Scan
Color
Visible
45 MP
8192 x 5460 px
38 fps
Yes
CoaXPress-4-Lanes (PoCXP)
1xCMOS
XGS 45000
Super 35 mm
3.2 x 3.2 µm
Global shutter
31.5 mm
26.2 x 17.4 mm
62 x 62 x 84 mm
330 g
8/10/12-bit *
F-mount or M-42A mount
12.5 Watt
-5°C to +45°C
* Some video processing functions not available with 12-bit output
A universal power supply that works with all JAI cameras equipped with a 12-pin Hirose power connector. Four versions are available:
PD-12UUP U.S. plug with 12-pin Hirose connector to camera
PD-12UEP European plug with 12-pin Hirose connector to camera
PD-12UU U.S. plug, flying leads (no 12-pin connector)
PD-12UE European plug, flying leads (no 12-pin connector)
Download Datasheet
Tripod adapter features mounting holes to fit spacing on Spark Series and (discontinued) Elite Series housings. Standard 1/4-20 attachment to tripods. Includes M3 screws (Depth 5). Only use the supplied screws or other screws having the proper length. Using longer screws can damage internal circuit boards.
Download 2D CAD drawing
The HR10A-10P-12S is a universal connector used for power and control signals for many JAI cameras. The connector is a female plug, with sockets, that mates to the connector on the back of the camera. It has soldering cups for easy assembly of custom cables.
This cable features flying leads on one end and a Hirose 12-pin connector on the other wired to match the pinout of JAI cameras with 12-pin connectors. The flying leads enable power to be supplied via two of the Hirose pins, while the remaining wires/pins can be utilized to access various I/O functions of JAI cameras (see individual camera datasheets/manuals for functions accessible through the Hirose connectors).
The cables can be used with JAI’s own “flying leads” power supplies, or with third-party or custom power supply systems.
Spark Series cameras are the perfect starting point for a wide range of machine vision, entertainment, and mapping applications.
Verification of circuit layouts and coatings, ball grid array inspection, component positioning, solder paste quality, dimensional accuracy, pick & place applications, and more.
Spark Series cameras capture high resolution images to track player movement, create virtual environments, generate broadcast replays, and other tasks.
Cameras mounted on aircraft, satellites, or ground vehicles capture images to help create maps, analyze terrain, or build street views.
Many types of industrial parts must be carefully measured to ensure conformance to system requirements. High resolution images enable higher precision on critical measurements.
High resolution, high speed, and high image quality enable large display panels to be inspected quickly and thoroughly.
High resolution Spark Series cameras support the development of new systems to ensure the safety of public venues, transportation hubs, borders, and elsewhere.
Get advice from our camera experts.
Update your browser to display this website correctly. Update my browser now
×