This product is in the process of being discontinued and is not recommended for new projects. Last orders must be placed by 30 September 2019. Comparable replacement products are available. Click the “Contact a JAI engineer” button below to discuss your requirements and explore alternative product options. The Apex AT-140CL is a 3-CCD prism-based industrial RGB area scan camera delivering 3 x 1.4 megapixels at 25 frames/second. It provides better color fidelity and spatial resolution than traditional Bayer color cameras and is designed for color-critical imaging and inspection tasks in machine vision, life science and microscopy applications.
Using a special prism-based imaging technique, the incoming light is separated into red, green and blue wavelengths, captured by three precisely-aligned CCD sensors. The result is better color accuracy and spatial precision than traditional color cameras using the Bayer mosaic technique.
In all Apex cameras the analog gain and the exposure time can be set independently for the red, green and blue channel allowing for better signal/noise conditions. This maximizes the dynamic range for each color channel resulting in improved image quality.
The AT-140CL is built around three Sony ICX267AL CCD sensors with global shutter. Combined with a Camera Link interface, this machine vision camera can output 3 x 1.4 megapixels at 25 frames/second in full resolution.
3-CCD RGB color camera.
3 x ICX267AL sensors.
Camera Link interface.
24-bit or 30-bit data output.
Individually controllable exposure for each RGB channel.
One-push white balance, programmable color matrix, and other advanced features.
Robust and compact design (shock 50G/vibration 3G).
Partial scan and binning modes available for higher frame rates.
A wide range of pre-set and programmable shutter and exposure modes.
Built-in pre-sets are provided for calibrating the camera with sRGB or Adobe RGB color spaces.
Apex Series
AT-140-CL
Area Scan
Color
Visible
1.4 MP
1392 x 1040 px
25 fps
No
Camera Link
3xCCD RGB
ICX 267AL
1/2 inch
4.65 x 4.65 µm
Global shutter
8.1 mm
6.5 x 4.8 mm
55 x 55 x 78.3 mm
290 g
8/10/12-bit
C-mount
6.1 Watt
-5°C to +45°C
A universal power supply that works with all JAI cameras equipped with a 12-pin Hirose power connector. Four versions are available:
PD-12UUP U.S. plug with 12-pin Hirose connector to camera
PD-12UEP European plug with 12-pin Hirose connector to camera
PD-12UU U.S. plug, flying leads (no 12-pin connector)
PD-12UE European plug, flying leads (no 12-pin connector)
Download Datasheet
Tripod adapter for Fusion Series cameras and some discontinued models with 40 mm spacing between mounting holes.
Only use the supplied M3 screws having the proper length. Using longer screws can damage internal circuit boards.
The HR10A-10P-12S is a universal connector used for power and control signals for many JAI cameras. The connector is a female plug, with sockets, that mates to the connector on the back of the camera. It has soldering cups for easy assembly of custom cables.
This cable features flying leads on one end and a Hirose 12-pin connector on the other wired to match the pinout of JAI cameras with 12-pin connectors. The flying leads enable power to be supplied via two of the Hirose pins, while the remaining wires/pins can be utilized to access various I/O functions of JAI cameras (see individual camera datasheets/manuals for functions accessible through the Hirose connectors).
The cables can be used with JAI’s own “flying leads” power supplies, or with third-party or custom power supply systems.
The Apex Series cameras are the ideal choice if you have imaging applications where you need very accurate color data and high spatial precision.
Eye examination looking at interior features such as the retina, optic nerve head and microcirculation in blood vessels.
Imaging of human tissue slices, cells and body fluid samples under a microscope or in tissue scanners.
Color quality control of ampoules, capsules, multi-layer tablets and other medical products.
Imaging inside the human body and organs. Surgical imaging via microscopes or ceiling mounted cameras.
Visual inspection of printed circuit boards, chips, electronic parts and wafers.
Calibration of chrominance and luminance values to specified color spaces, as well as detection of pixel defects.
High-end print inspection of currency, pharmaceutical packages and other printed material.
Paint inspection and verification of color LEDs in dashboard instruments.
Get advice from our product engineers.
Update your browser to display this website correctly. Update my browser now
×