JAI | JAI 2-CMOS multispectral camera. Simultaneous visible/NIR…

Fusion Series
FS-1600D-10GE

JAI's FS-1600D-10GE is a 2-CMOS multispectral prism camera providing simultaneous images of different spectral bands in a single camera - a visible color channel from 400-670 nm and a near infrared (NIR) channel from 740-1000 nm. This makes it possible to simultaneously inspect surface properties and sub-surface defects. A backwards-compatible 10 GigE interface provides exceptional speed and networking flexibility.

Contact a JAI engineer JP データシートをダウンロード
Product Image FS 1600 D T 10 GE front 45 degree 410x370px
Product Image FS 1600 D T 10 GE Rear 45 degree 410x370px
Product Image FS 1600 D T 10 GE front view 410x370px
Product Image FS 1600 D T 10 GE side view 410x370px

Simultaneous color and near infrared (NIR) imaging

The visible light channel outputs RGB or Bayer color images spanning the wavelengths visible to the human eye. The NIR channel, on the other hand, “sees” below the surface of organic and other materials to detect imperfections the human eye cannot see.

Replaces multiple inspection stations with a single setup

JAI’s prism technology ensures perfect two-channel alignment, allowing users to replace multiple inspection stations with a single setup, providing both ease of use and lower equipment and maintenance costs.

Individual exposure time adjustment for each channel

Separate exposure control for each channel allows the channels to be adjusted to one another without changes in the gain – maintaining a consistent signal-to-noise ratio at all times.

Features

  • Prism-based 2-CMOS multispectral area scan camera that simultaneously captures visible and near-IR light.

  • Backwards-compatible 10GBASE-T (10 GigE) interface auto-negotiates to match the speed of connected equipment including NBASE-T (5 GigE and 2.5 GigE) and standard 1 Gbps 1000BASE-T GigE Vision.

  • Sequence trigger mode for on-the–fly change of gain, exposure and ROI.

  • Supports IEEE 1588 Precision Time Protocol for synchronization in multi-camera applications.

  • Color output can be raw Bayer (8/10/12-bit) or 24/30-bit RGB using 5x5 in-camera interpolation.

  • Dual-stream output enables color and NIR images to be simultaneously output over a single cable.

  • Color Enhancer and Edge Enhancer functions included.

  • Single- and multi-ROI modes.

  • 20 percent better NIR sensitivity than previous CCD models.

Specifications

シリーズ名

Fusion Series

型番

FS-1600D-10GE

カメラタイプ

エリアスキャン

カラー/モノクロ

マルチスペクトル

波長

2 Bands Visible + NIR

規格

1.6 MP

規格 横x縦

1440 x 1080

フレームレート/ラインレート

226 fps

ROI

あり

インターフェース

10 Gbps GigE Vision

センサ

2xCMOS (Visible/NIR)

センサ名

IMX273

センササイズ

1/2.9型

画素サイズ 横x縦

3.45 x 3.45 µm

シャッタ

グローバルシャッタ

センサ対角

6.2 mm

センササイズ 横x縦

5 x 3.7 mm

外形寸法 高さx幅x奥行

62 x 62 x 86.5 mm

重量

270 g

映像信号出力

8/10/12-bit *

レンズマウント

Cマウント

消費電力

10.4 W

動作温度 (周辺温度)

-5°C ~ +45°C

Dimension Image FS 3200 D 1600 D Side

* 12bit出力でお使いになる場合一部の映像処理機能は使用できません。

Here are a few applications where Fusion Series industrial cameras are especially suitable.

The Fusion Series cameras are the perfect starting point for a wide range of machine vision applications.

Inspection of nuts, almonds and olives

The color, size, shape and damage nuts and almonds can be inspected using the RGB channel, while foreign objects (including olive pits) are more clearly seen with the NIR channel

Electronics inspection

Inspection of stuffed PCB boards including traces, solder, component placement/alignment, shorting, and other items where color and NIR inspection is important.

2D print inspection

Color inspection of magazines and pharmaceutical packaging as well as currency inspection looking at color correctness, water marks and security features woven into bank notes.

LCD display

Surface inspection of flat panels/displays looking for scratches and defective screen pixels.

Adding value to artificial intelligence in farming

Precision agriculture or intelligent farming has seen an exponential growth in the recent years. Removal of weeds or wild plants is of growing importance in intelligent farming.

Fruit and vegetable inspection

Fruit and vegetable inspection simultaneous looking at colors, ripeness, damages, signs of rot under skin, as well as detecting foreign objects (e.g. stones, metal pieces etc.)

Find the perfect machine vision camera to meet your application requirements.

Get advice from our camera experts.

Contact a JAI engineer JP
JAI engineer APAC3
お使いのブラウザは古いバージョンです。

正しく表示させるにはブラウザをアップデートしてください。 今すぐブラウザをアップデートする

×