Fusion Series
FS-1600T-10GE-NNM

JAI's FS-1600T-10GE-NNM is a 3-CMOS multispectral prism camera providing simultaneous images of three different spectral bands in a single camera - a visible monochrome channel from 400-670 nm, a near infrared (NIR) channel from 700-800 nm, and a second NIR channel from 820-1000 nm. This makes it possible to simultaneously detect or inspect visible elements, as well as analyze materials or defects using their spectral characteristics within a single NIR band or when combined across both NIR bands. A backwards-compatible 10 GigE interface provides exceptional speed and networking flexibility.

Product Image FS 1600 D T 10 GE front 45 degree 410x370px

Product Image FS 1600 D T 10 GE Rear 45 degree 410x370px

Product Image FS 1600 D T 10 GE side view 410x370px

Product Image FS 1600 D T 10 GE front view 410x370px

Simultaneous 3-channel multispectral imaging

With a monochrome channel and two separate NIR channels, the FS-1600T-10GE-NNM helps designers of multispectral systems to leverage the different way that some biological substances, foods, chemicals, and other materials appear when viewed in different portions of the visible/NIR spectrum.

Replaces multiple inspection stations with a single setup

JAI’s prism technology ensures perfect three-channel alignment, allowing users to replace multiple inspection stations with a single setup, providing both ease of use and lower equipment and maintenance costs.

Individual exposure time adjustment for each channel

Separate exposure control for each channel allows the channels to be adjusted to one another without changes in the gain – maintaining a consistent signal-to-noise ratio at all times.

Features
Specifications
Downloads
Accessories

Features

Prism-based 3-CMOS multispectral area scan camera that simultaneously captures one visible monochrome channel plus two separate near-IR bands.
Backwards-compatible 10GBASE-T (10 GigE) interface auto-negotiates to match the speed of connected equipment including NBASE-T (5 GigE and 2.5 GigE) and standard 1 Gbps 1000BASE-T GigE Vision.
Sequence trigger mode for on-the–fly change of gain, exposure and ROI.
Supports IEEE 1588 Precision Time Protocol for synchronization in multi-camera applications.
Triple-stream output enables monochrome and NIR images to be simultaneously output over a single cable.
Supports separate or unified control of key camera parameters for each channel.
Single- and multi-ROI modes.
Significantly higher NIR sensitivity than previous CCD models.

Specifications

シリーズ名

Fusion Series

型番

FS-1600T-10GE-NNM

カメラタイプ

エリアスキャン

カラー／モノクロ

マルチスペクトル

波長

3-Bands Visible + NIR

規格

1.6 MP

規格横x縦

1440 x 1080

フレームレート/ラインレート

213 fps

ROI

あり

インターフェース

10 Gbps GigE Vision

センサ

3xCMOS (Visible/NIR/NIR)

センサ名

IMX273

センササイズ

1/2.9型

画素サイズ横x縦

3.45 x 3.45 µm

シャッタ

グローバルシャッタ

センサ対角

6.3 mm

センササイズ横x縦

5.0 x 3.8 mm

外形寸法高さx幅x奥行

62 x 62 x 86.5 mm

重量

270 g

映像信号出力

8/10/12-bit *

レンズマウント

Cマウント

消費電力

11.6 W

動作温度 (周辺温度)

-5°C ～ +45°C

* 12bit出力でお使いになる場合一部の映像処理機能は使用できません。

Downloads

マニュアル＆データシート

ソフトウェア

証明書類

その他

Accessories

JAIカメラ専用 ACアダプタ　VA-055シリーズ

JAIカメラ専用 ACアダプタ　VA-055シリーズ
*出力コネクタの形状によって型番が変わります。
ご注文の際にはBもしくはFをご指定ください。

定格出力電圧：DC+12V
定格出力電流：3A
入力電源電圧：AC100V-240V (1次側ケーブルは100V専用)
電源周波数： 50/60Hz
動作温度：-10～+50℃
動作湿度：20％～85％（但し結露なきこと）
外形寸法：43(W) ｘ 30(H) ｘ 112（D)mm （突起部除く）
質量：285g/277g ケーブル長：2.0m
出力コネクタB / F（型番）
B ( VA-055 B )：12pin仕様
F ( VA-055 F )：6pin仕様

MP-41 三脚マウント

MP-41はBシリーズ、Fusionシリーズ、一部のApexシリーズにお使いいただる三脚マウントです。

固定用　M3スクリューネジ付属外形寸法 48mm x 26mm x 6mm

ご注意) 付属の専用ネジ以外のご使用はカメラ内部を破損する恐れがあります。取付けの際は必ず付属のネジをお使いください。

Here are a few applications where Fusion Series industrial cameras are especially suitable.

The Fusion Series cameras are the perfect starting point for a wide range of machine vision applications.

Inspection of nuts, almonds and olives

The size, shape and damage nuts and almonds can be inspected using the RGB channel, while foreign objects (including olive pits) are more clearly seen with the NIR channels.

Electronics inspection

Inspection of stuffed PCB boards including traces, solder, component placement/alignment, shorting, and other items where visible and NIR inspection is important.

LCD display

Surface inspection of flat panels/displays looking for scratches and defective screen pixels.

Adding value to artificial intelligence in farming

Precision agriculture or intelligent farming has seen an exponential growth in the recent years. Removal of weeds or wild plants is of growing importance in intelligent farming.

Fruit and vegetable inspection

Fruit and vegetable inspection looking for damages, signs of rot under skin, as well as detecting foreign objects (e.g. stones, metal pieces etc.)

Find the perfect machine vision camera to meet your application requirements.

Get advice from our camera experts.