Sweep+ Series
SW-4000T-MCL
Prism-based industrial RGB color line scan camera
The SW-4000T-MCL is a 4K prism-based industrial RGB color line scan camera with 4,096 pixels per line and a fast, 67.7 kHz line rate. Its 3-CMOS prism design features three separate imagers that simultaneously capture red, green, and blue spectral wavebands. Included is an advanced set of features providing the best possible performance and precision for web-based or continuous color imaging applications.
Prism quality at trilinear speeds
The SW-4000T-MCL is part of a new generation of high performance 3-CMOS prism line scan cameras. It delivers 4K output at up to 67.7 kHz, making it 4 times faster than previous prism cameras and roughly comparable to the fastest 4K trilinear models.
The best images from any angle
Prism technology makes it possible to view the red, green and blue channels through a single optical plane. This method eliminates off-angle viewing problems, spatial compensation issues, 3D cylindrical offsets, and other problems that can affect image quality with trilinear cameras.
Advanced set of unique features
The SW-4000T-MCL is one of the only 4K color line scan cameras to offer user-selectable pixel sizes, in-camera color space conversion, and both horizontal and vertical binning. It also supports direct connection to rotary encoders to simplify setup and operation.
Features
Specifications
Sweep+ Series
SW-4000T-MCL
Line Scan
Color
Visible
N/A
4096 x 1 px
66 kHz
N/A
Mini Camera Link
3xCMOS RGB
Custom
30.72 mm
7.5 x 7.5 µm or 7.5 x 10.5 µm
Global shutter
30.8 mm
30.8 mm
90 x 90 x 90 mm
765 g
8/10-bit
F-mount or M52-mount
9.3 Watt
-5°C to +45°C
Downloads
Manual & datasheet
Compliance documents
Other documents
PD-12 Power Supply
A universal power supply that works with all JAI cameras equipped with a 12-pin Hirose power connector. Four versions are available:
PD-12UUP U.S. plug with 12-pin Hirose connector to camera
PD-12UEP European plug with 12-pin Hirose connector to camera
PD-12UU U.S. plug, flying leads (no 12-pin connector)
PD-12UE European plug, flying leads (no 12-pin connector)
PC-12P Hirose 12-pin Connector
The HR10A-10P-12S is a universal connector used for power and control signals for many JAI cameras. The connector is a female plug, with sockets, that mates to the connector on the back of the camera. It has soldering cups for easy assembly of custom cables.
12P-02S Power Cable
This cable features flying leads on one end and a Hirose 12-pin connector on the other wired to match the pinout of JAI cameras with 12-pin connectors. The flying leads enable power to be supplied via two of the Hirose pins, while the remaining wires/pins can be utilized to access various I/O functions of JAI cameras (see individual camera datasheets/manuals for functions accessible through the Hirose connectors).
The cables can be used with JAI’s own “flying leads” power supplies, or with third-party or custom power supply systems.
10P-10M-AUX Auxiliary TTL cable
The 10P-10M-AUX is 10-meter cable for JAI cameras equipped with a 10-pin Hirose “auxiliary” connector. The plug at one end of the cable connects to the 10-pin connector on the back of the JAI camera. Flying leads at the other end of the cable can be used to send/receive TTL signals to/from specific pins on the auxiliary connector. Not all I/O functions may be supported depending on the pinout of each camera model. Check the pinout carefully or consult with JAI before purchasing.
26PMCL-02-26PMCL Power Over Mini-CL Cable
The 26PMCL-02-26PMCL features mini size Camera Link connectors at both ends for attaching to a camera with Mini-CL connectors and a frame grabber with Mini-CL connectors. Per the Power over Camera Link (PoCL) standard, pins #1 and #26 have been reassigned to carry +12V DC power. The cable can, therefore, be used with any JAI camera carrying the MCL or the PMCL model suffix. Length is 2 meters.
A 5-meter version is also available. Ordering number: 26PMCL-05-26PMCL.
26PMCL-02-26 CL / Power Over Mini-CL Cable
The 26PMCL-02-26 CL features a mini size Camera Link connector at one end for attaching to a camera, and a standard size connector at the other end for attaching to standard Camera Link frame grabbers. Per the Power over Camera Link (PoCL) standard, pins #1 and #26 have been reassigned to carry +12V DC power. The cable can, therefore, be used with any JAI camera carrying the MCL or the PMCL model suffix. Length is 2 meters.
Note: This cable can also be used to connect a JAI "CL" model (standard-sized MDR connectors) to a frame grabber with mini-sized (HDR) connectors.
Typical applications where Sweep+ Series industrial cameras are suitable
The Sweep+ Series line scan cameras are the ideal choice if you have imaging applications where you need very accurate color imaging via separate R-G-B color channels.
Sports imaging
Finish line cameras used in horse racing, speed boats, track events, and other high precision photo-finish applications.
Fruit and vegetable inspection
Bulk inspection of fruit and vegetables looking at size, colors, ripeness and damage for precise sorting and grading.
Food and grain inspection
Color and quality inspection of frozen food, rice grains, coffee beans, peas, cereals, tea and tobacco.
Semiconductors and LCD displays
Wafer geometry and surface inspection for early defect detection. Also surface inspection of flat panels/displays looking for scratches and defective screen pixels.
Recycling
Sorting of colored materials like glass, plastic, cans, and polymer materials to remove contaminants and organize for reuse.
2D print inspection
Color inspection of magazines and pharmaceutical packaging as well as currency inspection looking at color correctness.
3D print inspection
“Unwrapping” of cylindrical items such as cans, bottles, pens etc. for 360-degree label inspection.
Web applications
Web inspection of roll-based products including paper, plastic, textiles. Also inspection of wood, tile glaze and glass inspection.
Find the perfect machine vision camera to meet your application requirements
Get advice from our product engineers.
