The GOX-20405C-CXP is a small, attractively-priced industrial area scan camera offering a blend of features, image quality, and industrial grade reliability perfect for the next generation of machine vision systems. Featuring a state-of-the-art Sony Pregius S sensor with backside illumination (BSI) technology, and a CoaXPress 6.25 Gbps interface, the GOX-20405C-CXP delivers 20.3-megapixel color images at up to 29 fps.
Go-X Series cameras are built using JAI's proven manufacturing process that has delivered field failure rates of less than two cameras per thousand over the last five years. They're designed to withstand the shock, vibration, and thermal demands of typical industrial environments so they can keep critical inspection systems running 24/7/365.
Special dust prevention measures include cleanroom assembly, internal seals around the sensor compartment, and a pre-screening process to ensure every camera shipped delivers the best possible image quality via a clean, dust-free optical path.
The GOX-20405C-CXP features small but highly sensitive 2.74-micron pixels to pack more resolution into less silicon, so you get more megapixels for your money. The backside-illumination (BSI) pixel technology delivers low noise and high light sensitivity, matching the image quality of sensors with much larger pixels.
20.3-megapixel camera with 2.74-micron pixels and 1.1” optical format
Backside-illuminated Sony Pregius S IMX541 CMOS image sensor with raw Bayer or RGB (interpolated) output.
Includes color enhancement function and support for color conversion to sRGB, Adobe RGB, HSI, CIE XYZ, or custom RGB formats.
CoaXPress 2.0 interface featuring CXP-6 (6.25 Gbps) output over a single connector.
Can be powered over the interface (PoCXP) or from an external power supply via 6-pin Hirose connector.
Small and lightweight to mount easily on robotic arms, UAVs, and any other machine vision systems where motion or portability are vital.
Mounting holes with 21 mm or 20 mm spacing to fit most existing installations with no re-tooling required.
Industrial grade performance with ratings of 80G shock, 10G vibration, plus excellent thermal dissipation.
Full six-year warranty.
Includes new "Xscale" function supporting virtual, sub-pixel rescaling of output for greater binning flexibility or when matching the resolution and FOV of cameras in existing systems.
Go-X Series
GOX-20405C-CXP
Area Scan
Color
Visible
20.3 MP
4512 x 4512 px
29 fps
Yes
CoaXPress-1-Lane (PoCXP)
1xCMOS
IMX541 Pregius S
1.1 inch
2.74 x 2.74 µm
Global shutter
17.5 mm
12.4 x 12.4 mm
29 x 29 x 55 mm
60 g
8/10/12-bit
C-mount
4.1 Watt
-5°C to +45°C
The PD-6U power supply can be used to power most Go Series and Go-X Series cameras as an alternative to powering over the data interface. The power supply is RoHS compliant and conforms to key EMI and EMS standards. It is available in two versions:
With 6-pin Hirose connector to camera With flying leads that can be wired to the power lines on a separate I/O cable (see 6P-02S for an example of such a cable)
Both models feature U.S. style wall plugs. The power supply converts 50 Hz to 60 Hz AC input to 12V DC (1.3A) output.
Download Datasheet
Tripod adapter features mounting holes with 21 mm spacing to fit the holes on the bottom of Go-X Series models with Pregius S sensors. Can also be used with top mounting holes on Go-X Series models equipped with Pregius Gen 2 sensors. (Note: to use top holes on Pregius S cameras, use MP-43 plus vertical image flip function.)
Standard 1/4-20 attachment to tripods. Includes M3 screws (Depth 5). Only use the supplied screws or other screws having the proper length. Using longer screws can damage internal circuit boards.
Download 2D CAD drawing.
Tripod adapter features mounting holes with 20 mm spacing to fit bottom mounting holes on Go Series and Go-X Series housings. (Note: can be used with top mounting holes on Go-X Series models with Pregius S sensors.)
The 6P-02S-GOX cable features flying leads on one end and a Hirose 6-pin connector on the other wired to match the pin-out of JAI Go-X Series cameras with 6-pin connectors. The flying leads enable power to be supplied via two of the Hirose pins, while the remaining wires/pins can be utilized to access various I/O functions of JAI cameras (see individual camera datasheets/ manuals for functions accessible through the Hirose connectors).
The cables can be used with JAI’s own “flying leads” power supplies, or with third-party or custom power supply systems.
Download datasheet
The Go-X Series cameras are the perfect starting point for a wide range of machine vision applications.
From vision-guided robot arms to autonomous vehicles, Go-X Series cameras provide high quality images in a compact yet industrial-grade form factor.
Durable Go-X Series cameras can be configured for a wide range of automotive and automotive parts inspections either as off-the-shelf components or in 3rd party IP67 enclosures.
For simple to complex barcode and OCR-type applications, Go-X Series cameras provide the desired combination of high image quality and entry-level price.
Go-X Series cameras fit nicely into systems for inspecting printed circuit boards, sorting small parts, and other electronics-related applications.
Vision systems for track and trace, pill sorting, inspecting vials and ampoules, and many other applications, can all utilize Go-X Series cameras.
Go-X Series cameras are the perfect “eyes” for many different types of quality control inspection systems.
Get advice from our camera experts
Update your browser to display this website correctly. Update my browser now
×