Copyright (c) 2019, Pleora Technologies Inc., All rights reserved.

===================
SoftDeviceGEVMultiPart
===================

1. Description

This samples shows how to create and run Software GigE Vision device transmitting multi-part data. 

2. Prerequisites

This sample assumes that:
 * You have a network adapter installed on your PC with a valid IP address.
 * You have a GigE Vision controller/receiver that can receive and display images (such as eBUSPlayer or any other GigE Vision receiver that supports the GVSP protocol). The receiver should be reachable and on the same subnet as the interface from which it will be receiving.
 * You have an eBUS SDK Software GigE Vision Device license installed on your system

3. Description

3.1 SoftDeviceGEVMultiPart.cpp

Sample code as described above. Please refer to the comments in the source code for information on the methods used in this sample.


IMPORTANT: If you do not have an eBUS SDK Software GigE vision license installed on your system,
the sample will display a watermark on transmitted images, restrict your ability to customize the
identity of the device and disconnect all applications after 5 minutes.




