Copyright (c) 2018, Pleora Technologies Inc., All rights reserved.

===================
SoftDeviceGEV
===================

1. Description

This samples shows how to create and run the simplest possible Software GigE Vision device. 

2. Prerequisites

This sample assumes that:
 * You have a network adapter installed on your PC with a valid IP address.
 * You have a GigE Vision controller/receiver that can receive and display images (such as eBUSPlayer or any other GigE Vision receiver that supports the GVSP protocol). The receiver should be reachable and on the same subnet as the interface from which it will be receiving.
 * You have an eBUS SDK Software GigE Vision Device license installed on your system

3. Description

3.1 SoftDeviceGEV.cpp

Sample code as described above. Please refer to the comments in the source code for information on the methods used in this sample.


IMPORTANT: If you do not have a Pleora Developer Seat License for eBUS SDK or a 3rd Party GigE Vision Transmitter license installed on your system,
it will restrict your ability to customize the identity of the device and will disconnect all applications after 15 minutes.




