SP-5000M-PMCL / SP-5000C-PMCL

SP-5000-PMCL 5-megapixel camera with Anafocus Lince5M250 CMOS imager 
  • Spark Series
  • 1" CMOS imager with global shutter
  • Monochrome or Bayer color models 
  • Up to 137 fps for 8-bit output at full 5-megapixel resolution (2560 x 2048)
  • Up to 120 fps for 10-bit output 
  • 5.0 µm square pixels 
  • 60 dB linear dynamic range with 100 dB piece-wise HDR mode* 
  • In-camera CMOS pattern correction
  • On-chip 4-channel analog gain control in color model
  • 8/10/12-bit Camera Link output
  • Accepts power over Mini Camera Link or via 12-pin connector 
  • C-mount lens mount
  • Automatic Level Control (ALC) for dynamic lighting conditions
  • P-iris lens control, plus programmable 3-axis control for motorized lenses, pan/tilt heads, and other analog accessories

The SP-5000M-PMCL and SP-5000C-PMCL are high performance 5-megapixel CMOS cameras providing an exceptional combination of resolution, speed, and image quality.

Built around a 5-megapixel CMOS imager (Lince5M), these Spark Series cameras can provide full resolution output at up to 137 fps, depending on the bit depth and tap geometry. Featuring a global shutter, the camera can produce crisp images of moving objects with no spatial distortion. 

A dual Camera Link interface provides Base, Medium, or Full confugurations to fit performance requirements. AOI windowing modes enable even higher performance.

Despite its high frame rates, the SP-5000 delivers outstanding image quality including advanced pattern correction, built-in high dynamic range modes, and an on-chip 4-channel analog gain control on the color model (SP-5000C-PMCL) to individually adjust R, G, and B information for better white balancing with reduced noise.

The monochrome model (SP-5000M-PMCL) offers excellent NIR response and supports 1 x 2, 2 x 1, or 2 x 2 binning modes for even greater sensitivity.

The color model (SP-5000C-PMCL) provides raw Bayer output in 8-bit, 10-bit, or 12-bit pixel depths.

Both models include an automatic level control (ALC) function for auto exposure control in changing lighting conditions and a versatile lens control function that includes P-iris control as well as 3-axis control for motorized lenses, pan/tilt heads, and other analog accessories.

The SP-5000M-PMCL and SP-5000C-PMCL complies with “Power over Camera Link” which enables power to be supplied to the camera through the Camera Link cable(s). Because the power requirements of the camera exceed the amount of power which can be provided over a single PoCL connection, power must be supplied via both Camera Link cables in order to utilize the PoCL capabilities. If you plan to use this function, please be sure that the frame grabber board you are using also complies with this specification. Alternatively, the camera can be powered via a separate power supply connected to the 12-pin Hirose connector.

Uses C-mount lenses.

Dimensions (HxWxL): 62 x 62 x 55.5 mm

*HDR mode available on monochrome models only

PD-12U series power supply
2-meter power cable
MP-42 tripod mounting plate
Hirose 12-pin connector

Where to buy 
Contact JAI 

 ‭(Hidden)‬ Hubspot tracking code