Note: This product has been discontinued. Please contact JAI to discuss alternatives.
The EL-2800M-PMCL (momochrome) and EL-2800C-PMCL (color) are the first models in JAI's Elite Series, a new family of high performance industrial cameras designed for applications where image fidelity is paramount.These new 2.8 megapixels cameras utilize advanced Sony technology (ICX674 2/3” progressive scan) featuring EXview HAD CCD II technology.
The EL-2800 cameras deliver excellent sensitivity, improved NIR response, reduced smear, higher quantum efficiency and large image uniformity while minimizing shutter leakage and readout noise for an overall supreme image quality.
The cameras can run as high as 54.7 frames/s at full resolution (1920 x 1440 pixels) and at 60 frames/s in HD-mode - 1080 P60 (1080 x 1920 pixels).
Featuring Automatic Level Control (ALC), P-iris control and a programmable 3-axis motorized control capability, the cameras are well suited in outdoor applications with changing lighting conditions such as in traffic imaging, high-end surveillance and sports imaging.
The cameras are also suitable for semiconductor inspection, microscopy, and ophthalmology + other areas where high dynamic range, maximum image quality and high light sensitivity are key requirements. In addition to raw Bayer output, the color model (EL-2800C-PMCL) can perform in-camera color 24-bit RGB interpolation at 15.8 fps.The monochrome model (EL-2800M-PMCL) offers excellent NIR sensitivity and supports 1 x 2, 2 x 1, or 2 x 2 binning modes for even greater sensitivity.Both monochrome and color models feature fixed or variable partial scanning modes for increased frame rates, multiple trigger modes, a 256-point look-up table, and more.
The EL-2800M-PMCL (momochrome) and EL-2800C-PMCL (color) complies with “Power over Camera Link” which enables power to be supplied to the camera through the Camera Link cable(s). Because the power requirements of the camera exceed the amount of power which can be provided over a single PoCL connection, power must be supplied via both Camera Link cables in order to utilize the PoCL capabilities. If you plan to use this function, please be sure that the frame grabber board you are using also complies with this specification. Alternatively, the camera can be powered via a separate power supply connected to the 12-pin Hirose connector.
Dual Mini Camera Link connectors support Base or Medium configurations to achieve maximum frame rates depending on the bit depth of the output.Dimensions (HxWxL): 62 x 62 x 55.5 mmNote: These cameras will also soon be available with CoaXPress (2x), GigE Vision (with Link Aggregation), or USB3 Vision interfaces.
AccessoriesPD-12U series power supply2-meter power cableMP-42 tripod mounting plateHirose 12-pin connector
Manual v2.0 (PDF)
Software download3D CAD drawing (.stp format)Request a priceRequest an evaluation unit